Product ID:K206 SILICONE MOLD RELEASE
MSDS Date:12/01/1992
FSC:6850
NIIN:00F038084
MSDS Number: BWKPD

Emergency Phone: 717-786-7355/800-227-5538

Info Phone: 800-227-5538/717-786-7355

Cage: 5Y425

Telephone: 800-227-5538

Cage: 5Y425

HALOGENATED HYDROCARBON/ETHER BLEND

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HARMFUL, MAY CAUSE
TEMPORARY NERVOUS SYSTEM DEPRESSION W/ANESTHETIC EFFECTS. HIGHER
EXPOSURES MAY CAUSE TEMPORARY ALTERATION OF THE HEART'S ELECTRICAL
ACTIVITY. GROSS OVEREXPOSURE MAY BE F ATAL. LIQUID CONTACT MAY
CAUSE FREEZINGOF THE SKIN. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DIZZINESS, HEADACHE, INCOORDINATION, LOSS OF
CONSCIOUSNESS, FREEZING OF SKIN, IRRITATION, TEARING, BLURRING OF
VISION.

First Aid:INHALATION: IMMEDIATELY REMOVE TO FRESH AIR. IF NOT
BREATHING, GIVE CPR/OXYGEN IF NECESSARY. SKIN: WASH W/SOAP & WATER.
FLUSH W/WATER AFTER EXCESSIVE CONTACT. TREAT FOR FROSTBITE IF
NECESSARY. EYES: I MMEDIATELY FLUSH W/WATER FOR 15 MINS. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Flash Point:NON-FLAMMABLE
Lower Limits:4.2
Upper Limits:20.2
Extinguishing Media:CO2, DRY CHEMICAL, FOAM SPRAY
Fire Fighting Procedures:KEEP CONTAINERS COOL W/SPRAY. DON'T PUT OUT
FIRE UNLESS LEAK CAN BE STOPPED IMMEDIATELY. USE SELF CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS CONFINED IN A POORLY VENTILATED
AREA MAY BE IGNITED BY SPARKS/FLAMES/IGNITION SOURCES. CONTAINERS
MAY RUPTURE/EXPLODE UNDER FIRE CONDITIONS.

Spill Release Procedures:AVOID VAPORS. EVACUATE AREA UNTIL GAS HAS
DISPERSED. LARGE: WEAR SELF CONTAINED BREATHING APPARATUS.
ELIMINATE ALL SOURCES OF IGNITION IN THE VICINITY OF LEAK/RELEASED
VAPORS.

Handling and Storage Precautions:CONTENTS UNDER PRESSURE. STORE IN A
CLEAN, DRY AREA. DON'T HEAT >125.F. STORE AWAY FROM IGNITION
SOURCES. USE W/ADEQUATE VENTILATION.
Other Precautions:PROTECT CONTAINER AGAINST PHYSICAL DAMAGE. DON'T
REMOVE/DEFACE LABEL.

Respiratory Protection:NONE GENERALLY REQUIRED EXCEPT FOR NORMALLY
VENTED SITUATIONS.
Ventilation:LOCAL EXHAUST WHEN LARGE AMOUNTS ARE RELEASED. MECHANICAL
SHOULD BE USED IN LOW PLACES TO MAINTAIN EXPOSURE Protective Gloves:LINED RUBBER GLOVES
Eye Protection:CHEMICAL SAFETY GLASSES
Supplemental Safety and Health

Boiling Pt:B.P. Text:-13F
Vapor Pres:60 PSIG
Vapor Density:>1
Spec Gravity:0.81
Evaporation Rate & Reference:(BU AC=1): >1
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, COLORLESS W/SLIGHT ETHEREAL ODOR.

Stability Indicator/Materials to Avoid:YES
ALKALI/ALKALINE EARTH METALS-POWDERED ZINC, BERYLLIUM
Stability Condition to Avoid:IGNITION SOURCES, OPEN FLAME, GLOWING
METAL SURFACES, STATIC DISCHARGES, SPARKS, TEMPS >125F
Hazardous Decomposition Products:HYDROCHLORIC & HYDROFLUORIC ACIDS

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATINS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.